Poseidon 2250 je merilna naprava na katero lahko priklopimo do 26 senzorjev ki omogoča pošiljanje e-pošte v primeru preseženih vrednosti. Vrednosti in konfiguracija so na voljo prek spletnega vmesnika, ternutne vrednosti pa je možnost prenesti (WEB, XML, e-naslov, CSV). Model 2250 deluje tudi kot datalogger z vgrajenim Flash pomnilnikom. Tako omogoča delovanje, beleženje in kasnejše pošiljanje izmerkov tudi ko internetna povezava ni na voljo.
Do 26 senzorjev(RS485), dolžine do 1000 m.
3 Digitalni vhodi za relejna stikala.
Priklop na GSM modem za direktno pošiljanje SMS-ov.
OSNOVNE ZNAČILNOSTI
Senzorji so povezani preko 1-Wire (RJ11), skupne dolžine napeljave do 1000 metrov. Vsak senzor spremlja določene vrednosti in v primeru preseženih vrednosti ali vklopa/izkola kontakta o tem pošlje obvestilo prek e-pošte ali SNMP trap.
Sonde na voljo
Model Poseidon 2250 podpira do 26 senzorjev (sonde), za temperature, vlage, pretoka zraka in drugih vrednosti spremljanja.
Temperatura (do 26 senzorjev do 1000 metrov, -55 ° C do 640 ° C)
Vlaga (do 25 senzorjev do 1000 metrov)
Binarni input / kontaktna (do 3 detektorji dima, gibanja, poplave, kot, odpriranje/zapiranje vrat, pretoka zraka itd)
General input (0 do 10V, 4 do 20mA - z uporabo zunanjih pretvorniki za RS-485)
Temp-1Wire
Temp-485
Temp-485-Pt100
HTemp-485
Humid-1Wire
Sens-UI
Detektor poplave
Detektor uhajanja plina
Javljalnik dima
Detektor gibanja
TEHNIČNI PODATKI
-
Ethernet: RJ 45 - 10BASE-T / 10 Mbit/s
-
Port 1: RS-485 (connector RJ45)
-
Port 2: 1-Wire (connector RJ12)
-
Port 3: RS-232 (connector Cannon 9 Male)
-
3x Binary input: terminal board for 3x contact (0 to 500W)
-
Device setting:
-
locally - RS-232 Setup - sensor initialization and configuration, IP address configuration etc.
-
UDP Config - IP address configuration etc.- does not work remotely, but only on a local network segment
-
Over HTTP - Flash graphical interface- password and IP address range protection
-
Over SNMP - only some parameters
| Ethernet port |
|
| + Interface |
RJ45 (10BASE-T) – 10 Mbit or 10/100 Mbit network compatible |
| + Supported protocols |
IP: ARP, TCP/IP (HTTP, Modbus over TCP), UDP/IP (SNMP) |
| + SNMP compatibility |
Ver:1.00 compatible, some parts of the ver 2.0 implemented |
| |
| Port 1 - RS-485 |
| + Connector |
RJ45 (8 pins) |
| + Sensors / distance |
Max. 31 sensors, up to 1 000 metres |
| + 1-Wire interface |
Data, GND, +5V (max. 10 sensors, up to 15 metres) |
| |
| Port 2 - 1-Wire |
|
| + Connector |
RJ12 (6 pins - 4 pins used only) |
| + Sensors / distance |
Max. 10 sensors, up to 20 metres |
| |
| Port 3 - RS-232 |
|
| + Connector |
Cannon 9 male (DB9M) |
| + Pinout |
Standard IBM PC (RxD,TxD,RTS,CTS, DTR, DSR, GND) |
| + Usage |
Serial Setup, Output pins, GSM modem interface |
| + Sensors / distance |
No sensors, up to 20 metres |
| + OUTPUTS |
2 additional outputs (1/0), RTS(+10V/-10V), DTR(+10V/0V) |
| |
| Digital digital inputs |
|
| + 3x Contact inputs (Dry contact) |
Galvanic isolated up to 50V DC, max distance 30m,
connect it with a contact directly (dry contact). |
| |
| LED Status indicators |
| + POWER |
Green - power OK |
| + LINK & Activity |
Green - Ethernet connectivity |
| + SENSOR RS-485 |
Yellow slow blinking - Any RS-485 sensor not found
Yellow fast blinking - RS-485 sensors reading, value valid |
| + MODE & RS-232 |
Red - blinking - Device is in the RS-232 Setup mode
Red - lit - One (or more) of the sensors is out of the Safe Ranfe
Green slow blinking - RS-232 sensor not found
Green fast blinking - RS-232 sensor reading, value valid |
| |
| DIP SWITCH configuration |
| + DIP1 - RS--232 Setup mode |
ON = RS-232 Setup mode
OFF = Run mode |
| + DIP2 |
Not used |
| + DIP3 - Security |
ON = Security mode - remote configuration disabled
OFF = Non-Security mode - remote configuration enabled |
| + DIP4 |
Not used |
| |
| Physical parameters |
|
| + Voltage requirements |
12V / 250 mA DC - coaxial power connector (barrel), GND on the shield |
| + Dimensions |
25 x 82 x 90 [mm] (H x W x D ) |
| + Weight |
450 g |
| |
| Functional parameters |
|
| Device SETUP configuration possibilities |
- RS-232 Setup - over any RS-232 terminal 9600 8N1
- UDP Config - IP address assign via UDP with using PN Eye
- TCP Setup - Terminal configuration and sensors management
- WWW Setup - HTTP Flash application
- SNMP (just for some parameters) |
Facebook
