Poseidon2 model 3266 is independent device which can send Email when a contact is switched on or when temperature or humidity gets out of set range. Except Email, Poseidon model 3266 can send SNMP Trap. Values and configuration are accessible from WWW graphic interface, sensor's values over several network protocols (SNMP, XML, Modbus/TCP and others).
|
Poseidon model 3266 can notice operator of crisis situation in various method (switched on/switched off contact, temperature or humidity out of set range).
When a Alarm occurs, the device sends you Email and notice Your NMS (Network Management Software) over SNMP.
Configuration and current values over graphic WWW interface.
- 4 Dry contact inputs for contacts connecting
- You can connect up to 8 temperature or humidity sensors.
- To connect sensors (over maximal distance of 10 meters) you can use standard phone adaptors, cables and connectors RJ11 or RJ12.
- Contact switch on -> sending email or SNMP Trap to several recipients.
|
Application
-
Security: supervising of sensors in IT rooms.
-
SCADA systems: connecting of external inputs
-
Monitoring of back-up power source: UPS and Diesel engines
-
Monitoring of operating conditions: (temperature and humidity) ICT technologies (fire, security and phone systems)
-
Logging of processes: storages, cold-storage rooms, freezers and fridges (food industry and pharmacy)
-
IT – monitoring: server rooms, 19“ racks (ICT)
-
Camera systems: external sensors connecting(door contact, PIR)
-
Large buildings: heating and air-condition optimalization
-
Systems interconnecting: fire (EPS), security (EZS), access system
-
Air-condition monitoring: temperature and evaporated water leaking
-
Supervising systems: Information points, ATM, terminals
What Poseidon2 3266 measures
Sensors are connected over 1-Wire (RJ12), total wiring length must not exceed 10 meters. Each sensor monitors whether the value is in set range (including inputs for connecting contacts). It warns about set range exceeding (Alarm status) via Email or sending SNMP trap.
Compatible probes
-
Temperature - Temp-1Wire
Temperature probes, different lengths of connecting cables according to ordering number:
600 005 = 3 meters long, 600 242 = 1 meters long, 600 056 = 10 meters long)
-
Humidity - Humid-1Wire
Humidity probe, long:
600 279 = 3 meters long, 600 278 = 1 meters long)
-
4 inputs for Dry Contact
-
Door contact
-
Flood detector
-
Gas leak detector
-
Smoke detector
-
Motion detector
Basic features
-
It can be connected to every monitoring system of building, industry, IT and networks.
-
Support and plug-in modules for many NMS application (LoriotPro, Nagios, SNMPc, HP OpenView, IBM Tivoli, MRTG and others).
-
Works with most SCADA systems (OPC server and I/O server over Modbus/TCP)
-
Graphic WWW interface for configuration and values monitoring.
-
Open communication protocols (WEB, Email, SNMP, XML, Modbus/TCP)
-
One Poseidon 3266 unit monitors up to 7 external probes (4 contacts, 3 sensors over a bus), every sensor has unique ID.
-
Security increased with password, IP address range, HW protection against configuration changes.
-
No SW necessary.
-
Set of supporting programs and utilities (PN Eye, Pos-Excel, PD Trigger and others)
-
We supply programs for food industry (CapTemp), IT monitoring (nmsDashboard) and others
-
SDK (Software Development Kit) development library available + examples (VB, Delphi, C, C#etc.)
-
For OEM partners who order 50 pieces or more option to change device name, HTML design contact list and other.
-
FirmWare update over WWW interface
Technical specification
-
Port 1: Ethernet RJ 45 - 10BASE-T / 10 Mbit/s
-
Port 2: SENSORS - 1-Wire bus (RJ12)
-
Port 3: 4 Dry Contact input for contact connecting
-
Power supply : 12V SS
-
Device setting:
|
Port 1 - Ethernet port
|
|
|
+ Interface
|
RJ45 (10BASE-T) – 10 Mbit or 10/100 Mbit network compatible
|
|
+ Supported protocols
|
IP: ARP, TCP/IP (HTTP, Modbus over TCP), UDP/IP (SNMP)
|
|
+ SNMP compatibility
|
Ver:1.00 compatible, some parts of the ver 2.0 implemented
|
|
|
|
Port 2 - 1-Wire sensor bus
|
|
|
+ Connector
|
RJ12 (6 pins - 4 pins used only)
|
|
+ Sensors / distance
|
model 3265 - max. 5 sensors, up to 10 m total
model 3262 - max. 2 sensors, up to 10 m total
|
|
|
|
Port 3 - Dry contact inputs
|
|
|
+ 4 Contact inputs
|
Connect it with a contact directly (dry contact).
|
|
+ Isolation
|
Galvanic isolated up to 50V DC
|
|
+ Sensor type
|
NO or NC contact switch
|
|
+ Max distance
|
Up to 30 m
|
|
|
|
LED Status indicators
|
|
+ POWER
|
Green - power OK
|
|
+ LINK & Activity
|
Yellow - Ethernet connectivity
|
|
|
|
DIP SWITCH configuration
|
|
+ DIP1 - RS--232 Setup mode
|
Not used
|
|
+ DIP2 - Security
|
ON = Security mode - remote configuration disabled
OFF = Non-Security mode - remote configuration enabled
|
|
|
|
Physical parameters
|
|
|
+ Voltage requirements
|
9 - 15V / 250 mA DC
coaxial power connector (barrel), GND on the shield
|
|
+ Dimensions
|
35 x 101.6 x 76.2 [mm] (H x W x D )
|
|
+ Weight
|
150 g
|
|
|
|
Functional parameters
|
|
|
Device SETUP configuration possibilities
|
- UDP Config - IP address assign via UDP with using PN Eye
- TCP Setup - Terminal configuration and sensors management
- WWW Setup - HTTP Flash application
- SNMP (just for some parameters)
|
The 'Initial Box' packaging transport your products at controlled tempe...
Facebook
