Poseidon2 3268 je majhen spletni strežnik, ki lahko pošljete e-pošta, ko je stik vklopljen ali v v primeru preseženih vrednosti temperature in vlage. Lahko pa tudi nadzirate do dva relejna izhoda iz spletnega vmesnika in naparava prižge npr. dodaten ventilator v hladilniku. Vrednosti in konfiguracija so na voljo prek spletnega vmesnika, vrednosti pa prek mrežnih protokolov (SNMP, XML, Modbus / TCP in drugi). Meriilnik ima interni spomin za 250.000 meritev.
Na merilnik lahko povežemo do 2 relejna izhoda za nadzor zunanje naprave, 4 vhode za povezovanje in do 8 senzorje za temperaturo ali vlago.
Senzorji so povezani v skupni dolžini do 10 metrov, standardni telefonski kabel RJ12 in RJ11.
OSNOVNE ZNAČILNOSTI
Senzorji so povezani preko 1-Wire (RJ12), skupna dolžina napeljave ne sme presegati 10 metrov. Vsak senzor spremlja določene vrednosti in v primeru preseženih vrednosti ali vklopa/izkola kontakta o tem pošlje obvestilo prek e-pošte ali SNMP trap.
Sonde na voljo
Temperatura - Temp-1Wire, sonde različnih dolžin (1, 3 in 10 m)
Vlaga - Humid-1Wire, različne dolžina (1 in 3 m)
4 vhodi za kontakt
Kontakt odpiranja vrat
Detektor poplave
Detektor uhajanja plina
Javljalnik dima
Detektor gibanja
TEHNIČNI PODATKI
-
Port 1: Ethernet RJ 45 - 10BASE-T / 10 Mbit/s
-
Port 2: SENSORS - 1-Wire bus (RJ12)
-
Port 3: 4 Dry Contact input for contact connecting
-
Port 4: 2 switching outputs of internal relay
-
Power supply : 12V SS
-
Device setting:
| Port 1 - Ethernet port |
|
| + Interface |
RJ45 (10BASE-T) – 10 Mbit or 10/100 Mbit network compatible |
| + Supported protocols |
IP: ARP, TCP/IP (HTTP, Modbus over TCP), UDP/IP (SNMP) |
| + SNMP compatibility |
Ver:1.00 compatible, some parts of the ver 2.0 implemented |
| |
| Port 2 - 1-Wire sensor bus |
|
| + Connector |
RJ12 (6 pins - 4 pins used only) |
| + Sensors / distance |
model 3265 - max. 5 sensors, up to 10 m total
model 3262 - max. 2 sensors, up to 10 m total |
| |
| Port 3 - Dry contact inputs |
|
| + 4 Contact inputs |
Connect it with a contact directly (dry contact). |
| + Isolation |
Galvanic isolated up to 50V DC |
| + Sensor type |
NO or NC contact switch |
| + Max distance |
Up to 30 m |
| |
| Port 4 - Relay switch outputs |
|
| + 2 Digital outputs |
Control via network (Web, XML, SNMP) or signal local alarm |
| + Isolation |
Relay switch up to 50V DC, max DC current 24V/1A, 50V/0.5A |
| + Switch type |
3 pins, can be used as NO or NC contact switch |
| |
| LED Status indicators |
| + POWER |
Green - power OK |
| + LINK & Activity |
Yellow - Ethernet connectivity |
| |
| DIP SWITCH configuration |
| + DIP1 - RS--232 Setup mode |
Not used |
| + DIP2 - Security |
ON = Security mode - remote configuration disabled
OFF = Non-Security mode - remote configuration enabled |
| |
| Physical parameters |
|
| + Voltage requirements |
9 - 15V / 250 mA DC
coaxial power connector (barrel), GND on the shield |
| + Dimensions |
35 x 101.6 x 76.2 [mm] (H x W x D ) |
| + Weight |
150 g |
| |
| Functional parameters |
|
| Device SETUP configuration possibilities |
- UDP Config - IP address assign via UDP with using PN Eye
- TCP Setup - Terminal configuration and sensors management
- WWW Setup - HTTP Flash application
- SNMP (just for some parameters) |
Facebook
