Poseidon is an IP thermostat with 2 relay outputs, 4 dry contact inputs, and support for 4 sensors. Includes a built-in web server, output control and alarm alerts (e-mail and SNMP trap). Two relay outputs rated up to 110/230V can be controlled manually over a web interface.
Poseidon 3468 alerts the operator to critical situations (contact opened/closed, or temperature/humidity out of safe range).
In case of an alarm, Poseidon sends an e-mail and connects to your NMS (Network Management System) with a SNMP trap.
Configuration and current sensor readings are accessible through a graphical WWW interface.
- IP thermostat function to control outputs locally
- 2 outputs rated at 250V (double-throw relay contacts)
- Connect up to 4 temperature or humidity sensors and 4 Dry Contact inputs
- When a contact is closed, e-mails or SNMP traps are sent to multiple recipients
|
Applications
-
Remote rack monitoring
Door open, temperature / humidity, power outage, states of contacts, equipment restart
-
UPS / back-up generator monitoring
Fuel level, diesel generator status, remote start over IP, monitoring of temperature and service contacts
-
Air conditioning control over IP
Turns on heating / cooling when specified temperatures are sensed
-
IP-based security systems
-
Operation logging: storages, coolers and freezers (food and pharmaceutical industry)
-
Monitoring systems: Information booths, ATMs, terminals
What does Poseidon 3468 measure
Intelligent sensors are connected to the 1Wire (RJ11) bus.
-
Total bus length up to 10/30 m.
-
Each sensor watches its own readings (SafeRange). When the range is exceeded (alarm condition), e-mail or SNMP trap is invoked.
-
Temperature - Temp-1Wire
-
Humidity - Humid-1Wire
Sensors with contacts:
-
2 relay outputs
-
4 Dry Contact inputs
-
Flood detector
-
Gas leak detector
-
Smoke detector
-
Motion detector
IP thermostat = output control
Each relay output can be controlled either by a local condition, or manually:
-
Over WWW by the user
-
M2M XML protocol
-
M2M SNMP protocol
-
M2M Modbus/TCP protocol
The local condition mode works as a thermostat or hygrostat over IP. The output can be tied to any connected sensor, including dry contact inputs. The control is affected by sensor hysteresis.
Basic features
-
No special SW needed
-
Installation in 10 minutes
-
Built-in graphical WWW interface for configuring the unit and displaying the reading
-
Outputs controlled over IP or locally (thermostat mode). Outputs can be controlled based on a selected sensor (input) value being less than/greater than specified.
-
Alarm alerts:
-
Pop-up window with the alert, using the supplied SW application
-
With the supplied HWg SDK, you can control Poseidon from your own applications in 2 hours after opening the box
-
Applications in IT:
-
Poseidon is supported by more than 60 NMS systems (LoriotPro, Nagios, SNMPc, HP OpenView, IBM Tivoli, MRTG, Intellipool, and more)
-
SDK (Software Development Kit): libraries, examples (ActiveX, VB, Delphi, C, C#, .NET)
-
Industrial applications:
-
Works with most SCADA systems (OPC server and I/O server via Modbus/TCP)
-
“Soft-PLC” Windows application for remote access to the units, measuring and control
-
Windows application for data collection in the food industry, IT systems for pharmacies